# 2.5: Solubility in an aqueous world - The Hydrophobic Effect

- Page ID
- 69576

### Introduction

Many biomolecules such as triacyglycerides, cholesterol esters and waxes are nonpolar. Other biomolecules such as proteins and many lipids have both polar and nonpolar parts. We know from experience that oil and water float on water. You have also probably performed liquid-liquid extractions in chemistry lab in which you uses the solubility properties of nonpolar molecules to extract them from a mixture in water to a more nonpolar phase such as octanol or chloroform. To understand the stability of biomolecules that contain nonpolar parts in aqueous solution, we need to understand not only the noncovalent interactions of the molecules with water (which we explored in Chapter 2.4), but also the thermodyamics of their molecular interactions in aqueous environments.

We have been taught and internalized the notion that "like-dissolves like". We anthropomorphize molecules to say nonpolar molecules "like" to be in nonpolar environments. We can rationalize solubility properties by examining the noncovalent attractive and repulsive interactions of a molecule in an aqueous solution but when we do so we are usually focusing on enthalpic contributions to stability. What about entropy? We should consider net changes in noncovalent interactions in solute:solute, solute:solvent and solvent:solvent as well as their thermodynamic contributions to overall stability. When we consider the thermodynamics of the solubility of a molecules in water, we need to determine the ΔG, the free energy change, for all processes involved.

### The Change in Free Energy (G) and Chemical Potential (μ)

ΔG, the free energy change for a reaction, determines the spontaneity and extent of a chemical or physical reaction. The free energy of system depends on 3 variables, temperature T, pressure P, and n, the number of moles of each substance. For the latter, think of solute X on two different sides of a permeable membrane. If the concentration of X is the same on each side, as shown in Figure \(\PageIndex{1}\) below, the system is in equilibrium.

Figure \(\PageIndex{1}\): A system of a molecule in two compartments separated by a membrane

If the system is composed of two different parts, A and B, the system is at equilibrium (ΔG=0) if T_{A} = T_{B}, P_{A} = P_{B}, and the change in the absolute free energy per mole of A is ΔG_{A}/Δn = ΔG_{B}/Δn. More precisely, using simple calculus, we would discuss incremental changes in absolute free energy/mol, dG_{A}/dn for A, which is the chemical potential of A, μ_{A}) and dG_{B}/dn (μ_{B}) for B. At equilibrium dG_{A}/dn = dG_{B}/dn. We will use the fre energy G here but μ later in this section. G then is the absolute free energy/mol (again chemical potential), where G=G^{o} +RTln[A]. From this the equations you used in introductory chemistry (and that we reviewed in X.XX) the followin equation can be written. .

\begin{equation}

\begin{array}{l}

\Delta \mathrm{G}=\Delta \mathrm{G}^{0}+\mathrm{RTIn} \mathrm{Qr} \\

\Delta \mathrm{G}=\Delta \mathrm{H}-\mathrm{T} \Delta \mathrm{S} \\

\Delta \mathrm{G}^{0}=\Delta \mathrm{H}^{0}-\mathrm{T} \Delta \mathrm{S}^{0} \\

\Delta \mathrm{G}^{0}=-\mathrm{RTInK} \mathrm{eq}

\end{array}

\end{equation}

Now let's apply this to the chemical equation for the solubility of a given solute in water. If you add either a sparing soluble hydrocarbon (HC) or sodium chloride to water, eventually you reach a point of saturation. For the salt, the water is saturated with dissolved NaCl, and no further increase in NaCl (aq) occurs. For a sparing soluble hydrocarbon, the solution reaches saturation after which phase separation occurs.

Let's add a drop of a slightly soluble hydrocarbon liquid (HC_{L}) into water, as pictured in the diagram below. At t=0, the system is not at equilibrium and some of the HC will transfer from the pure liquid to water, so at time t=0, **ΔG _{TOT}** < 0. This is illustrated in Figure \(\PageIndex{2}\) below.

Figure \(\PageIndex{2}\): ΔG vs time for interaction of a hydrocarbon with water

The following equations can be derived.

\begin{equation}

\begin{array}{c}

\Delta \mathrm{G}_{\mathrm{TOT}}=\left(G_{\mathrm{HC}-\mathrm{W}}\right)-\left(G_{\mathrm{HC}-\mathrm{L}}\right)=\mathrm{G}_{\mathrm{HC}-\mathrm{W}}^{0}+R T \ln [\mathrm{HC}]_{\mathrm{W}}-\left(\mathrm{G}_{\mathrm{HC}-\mathrm{L}}^{0}+R T \ln [\mathrm{HC}]_{\mathrm{L}}\right)= \\

\Delta \mathrm{G}_{\mathrm{TOT}}=\left(\mathrm{G}_{\mathrm{HC}-\mathrm{W}}^{0}-\mathrm{G}_{\mathrm{HC}-\mathrm{L}}^{0}\right)+R T \ln \left([\mathrm{HC}]_{\mathrm{W}}-\ln [\mathrm{HC}]_{\mathrm{L}}\right)= \\

\Delta \mathrm{G}_{\mathrm{TOT}}=\Delta \mathrm{G}^{0}+R T \ln \frac{[\mathrm{HC}]_{\mathrm{W}}}{[\mathrm{HC}]_{\mathrm{L}}}

\end{array}

\end{equation}

Now add a bit more complexity to the last example. Add a hydrocarbon x, to a biphasic system of water and octanol as shown in Figure \(\PageIndex{3}\). Shake it vigorously. At equilibrium, x would have "partitioned" between the two mostly immiscible phases.

Figure \(\PageIndex{3}\):

A simple reaction can be written for this system: X aq ↔ X oct.

Clearly, if X is a hydrocarbon, **ΔG** < 0 for the reaction written above. Also, **ΔG**^{o} < 0, since this term is independent of concentration and depends only on the intrinsic stability of in water in comparison to that of octanol. This simple equation holds:

\begin{equation}

\Delta \mathrm{G}_{\mathrm{TOT}}=\left(\mathrm{G}_{\mathrm{X}-\mathrm{oct}}^{0}-\mathrm{G}_{\mathrm{X}-\mathrm{w}}^{0}\right)+R T \ln \frac{[\mathrm{X}]_{\mathrm{oct}}}{[\mathrm{X}]_{\mathrm{w}}}=\Delta \mathrm{G}^{0}+R T \ln \frac{[\mathrm{X}]_{\mathrm{oct}}}{[\mathrm{X}]_{\mathrm{w}}}

\end{equation}

At equilibrium, ΔG^{0}=0 and the equation can be rewritten as:

\begin{equation}

\Delta \mathrm{G}^{0}=-R T \ln \frac{[\mathrm{X}]_{\mathrm{oct}}}{[\mathrm{X}]_{\mathrm{w}}}=-\mathrm{RTlnK}_{\mathrm{part}}

\end{equation}

where K_{part} is the equilibrium partition coefficient for X in octanol and water. This can readily be determined in the lab. Just shake a separatory flask with a biphasic system of octanol and water after injecting a bit of X. Then separate the layers and determine the concentration of x in each phase. Plug these numbers into the last equation. You should be able to predict the sign and relative magnitude of **ΔG ^{o}** since it does not depend on concentration, but only on the intrinsic stability of the molecules in the different environments. K

_{paft}values are often determine for drugs since they often must diffuse across cell membranes to move into the cytoplasm where they can act. Drugs hence must have a reasonable K

_{part}to pass through the membrane but not so high that they are insoluble.

# Introduction to the Hydrophobic Effect

Now let's ask this question: What are the enthalpic and entropic contribution to the **ΔG **for the interaction of a nonpolar molecule HC with water? For this section we will replace ΔG with Δμ (the change in chemical potential but we will use these terms interchangeably). ** **Likewise we will use this equation: Δμ^{o} = ΔH^{o}^{ }- T ΔS^{o}.

Also instead of framing the reaction as the dissolution of an organic molecule in water, we will frame is as the** transfer of a hydrocarbon X from aqueous solution to the pure hydrocarbon liquid (HC) or **

\begin{equation}

\mathrm{X}(\mathrm{aq}) \leftrightarrow \mathrm{X}(\mathrm{HC})

\end{equation}

Figure \(\PageIndex{4}\) below shows the standard free energies of transfer of a hydrocarbon X from aqueous solution to a pure liquid hydrocarbon (HC), X (aq) ↔ X (HC). where

\begin{equation}

\Delta \mu^{\circ}=\mu^{\circ} x(H C)-\mu^{\circ} x(a q)

\end{equation}

Figure \(\PageIndex{4}\): Standard free energies of transfer (μ^{0}) of a hydrocarbon X from aqueous solution to a pure liquid hydrocarbon (HC)

Δμ^{o} is less than 0 since transfer back to the pure HC is favored from a stability perspective. In each graph, Δμ^{o} is less than 0, and the value of Δμ^{o} decreases (gets more negative as you go up the y axis which shows increasingly negative values of Δμ^{o}) in a linear fashion with increasing numbers of carbon atoms in the alkyl chain. Notice the lines are unbelievably straight and parallel. Nature is speaking to us in these figures. By determining the surface area of the hydrocarbon molecules and the decrease in Δμ^{o} with each added CH_{2} (methylene group), one can calculate that the Δμ^{o} decreases by 25 cal/Å^{2}, per methylene added.

We expected that Δμ^{o} for the transfer of X to a pure liquid HC would be negative. We could get more information if we would determine both the entropic and enthalpic contributions. Such data is presented in the table below, which shows the transfer of short, single chain alcohol X (an amphiphile with a polar head and a longer nonpolar "tail") from the pure liquid alcohol (ROH) to water (the opposite of the previous figures.)

\begin{equation}

X(R O H) \leftrightarrow X(W)

\end{equation}

Thermodynamic Parameters for Transfer of Aliphatic Alcohol X from the **Pure Liquid to Water** at 25^{o}C (enthalpy determined by calorimetry)

alcohol X | μ_{w}^{0}-μ_{ ROH}^{0} (cal/mol) |
H_{w}^{0}-H_{ ROH}^{0} (cal/mol) |
S_{w}^{0}-S_{ ROH}^{0} (cal/deg mol) |
(Cp)_{w}^{0}-(Cp)_{ROH}^{0}(cal/degmol) |

ethanol | 760 | -2430 | -10.7 | 39 |

n-propanol | 1580 | -2420 | -13.4 | 56 |

n-butanol | 2400 | -2250 | -15.6 | 72 |

n-pentanol (solubility 22g/L H _{2}O) |
3222 | -1870 | -17.1 | 84 |

We expect the Δμ^{o} to be increasingly positive as the chain length gets longer and their solubilities in water becomes increasingly disfavored. What is perplexing about this data is not that the transfer of these ROHs to water is disfavored, but that transfer is **enthalpically **favored (negative ΔH^{0}). This seems to be counterintuitive since it goes against the adage that "like dissolves like" as was discussed earlier. From an enthalpic point of view, the amphiphiles prefer (albeit marginally) to be in water. What makes this reaction disfavored is entropy. The data shows that the nonpolar molecule would prefer not to be in water because it is disfavored entropically.

At first glance you might guess that the entropy should __favor__ movement of ROHs into water since they could access a larger volume to access and have a greater freedom of motion. Hence here are more possible microstates for the ROH in water. However, this is only part of the process. What we haven't considered is the entropy of the water. To place a hydrocarbon in water, a literal cavity in the water must be created that will accommodate it. Creation of this more ordered cavity must be entropically disfavored (again because the process proceeds to a state with fewer microstates and lower positional entropy).

For the reverse process, transferring the hydrocarbon from water to the pure liquid will dissipate the cavity, and lead to more available microstates for the released solvent, bulk water. It is this entropic contribution that favors the movement of a hydrocarbon from water to the pure hydrocarbon lipid. This **"hydrophobic effect**" is the main thermodynamic drive to move organic molecules out of water.

Image this scenario. When you place a hydrocarbon group in water, water seeks (admittedly an anthropomorphic term) to maintain its hydrogen bonding. Hence it is forced into a more ordered structure around the HC to maintain its H-bonding, characterized by fewer microstates. We will explore the hydrophobic effect in great deal in a future chapter.

How can we explain the favorable enthalpic contribution to place a nonpolar molecule into water? Again, this goes against our adage of "like dissolves like". The negative ΔH suggests interactions among all the participants are more favorable when the nonpolar group is in water. One source of such interactions could be the highly structured water in the "cage" that surrounds the nonpolar molecule. If it were more structured than bulk water, hence more "ice-like" in nature, then the formation of these extra H-bonds would contribute to the negative enthalpy change. When the nonpolar molecule is removed from the water, a process which proceeds with a positive ΔH, the cage of "ice-like" water would "melt", which, like the melting of ice, is not favored enthalpically as heat must be added. Heat energy must be supplied to break the H-bonds as ice changes state to liquid water. This molecular model to understand the thermodynamic data might yet be a simplistic model, but for time being, let's use it.